
Band Heater
Beeco band/barrel heaters high quality supreme performance asthetic looks, durability & reliability for plastic industry.
Material | Maximum operating temperature | Maximum watt density | ||
Stainless Steel Mild Steel Brass Copper |
degree f 1400 |
degree c 750 |
w/in2 100 |
w/cm2 15.5 |

Ceramic Band Heaters
Beeco band ceramic barrel heaters high quality supreme performance durability & reliability for plastic chemical jacket heating.
- reduce heat loss
- maximize operator comfort
- reduce overall operating cost
- conserve energy
- full flexibility
- good temperature uniformity
- heat through conduction and radiation
- wattage tolerance 5%(-10%)
- resistance tolerance:10%(-5%)k

Physical size construction limitation
Shealth Material: stainless steel
- a) insulation material : ceramic fiber blanket
standard thickness: 6mm(1/4″)
double thickness: 13mm(1/2″) - b)overall thickness
standard insulation 16mm(5/8″)
double insulation 19mm(3/4″) - c) minimum thickness 25mm(1″)
standard width increments 13mm(1/2″)

Width tolerance
- 25 to 89mm(1 to 3’/2″): +_1’/16″
- 102 to 165mm(4 to 6’12): 1’/8″
- overall 165mm(6’/12):1/4″
Minimum Diameter: 30mm
Gap: 10mm(3/8″) if a larger gap is required for probes or thermocouples specify when placing order to beeco.
Construction clamp | Minimum Diameter inch || mm |
Minimum Width inch || mm |
Minimum Inner Diameter inch || mm |
|||
one piece | 1.5 | 30mm | 1 | 28 | 760 | 30 |
two piece/single | 6 | 150mm | 1 | 28 | 1901 | 75 |
double insulation | 2 | 50mm | 1.5 | 39 | ||
built in bracket for thermocouple | 2 | 50 | 1 | 28 | ||
latchd trunnion | 4 | 100 | 1 | 28 | ||
shell overlap | 2 | 50mm | 10 | 39 | ||
l shape flange | 2 | 30mm | 1 | 28 |

BE-174
Application
- Injection molding machines
- Plastic extruders
- The food industry
- Blow-molding machines
- Container,pipe or tank heating
- The pharmaceutical industry

BE-174
Construction and features
- Economical
- Dependable and efficient
- High quality mica and resistance wire
- Ersatile design
- CSA and CE certified